power guard

The Power Guard

is a high-performance hybrid backup pump system that has all the features you need to protect your basement when the power or primary pump fails. When the power is on the PowerGuard acts as a true secondary sump pump and will operate on wall power without draining the battery. The Power Guard offers innovative features like 24/7 system monitoring, powerful pumping, and a massive charger unit to recharge the battery. If you want the peace of mind of having the ultimate flood protection for your home, look no further than the Power Guard..

DUAL POWER PROTECTION

Traditional backup pump systems typically operate only for the life of the battery, providing a limited timeframe to replace the faulty sump pump. The Power Guard operates in both battery mode and indefinitely off your standard wall power, acting as a second sump pump to keep your basement dry until the problem can be corrected.

SMART CONTROL

power guard control

The Power Guard controller has a robust processor that gives it more features and monitoring capability. It monitors the water level, power status, and battery voltage 24/7; it also monitors for dirty sensors and the motor current of the pump for added protection.

Most reliable switch

SumpTek’s solid-state sensors are responsible for turning the pump on and off in an emergency. They have no moving parts or pieces to get hung up or fail, unlike a traditional mechanical float switch found on other systems. These sensor switches last 10x longer and are proven for reliable and redundant operation year after year.

Twice the protection

Both sensors work independently; the top sensor will continue to operate the pump even if the bottom sensor can’t. With the PowerGuard, you get two of the most reliable sensor switches in one system.

Maximum pumping power

Backup systems should always pump more than your primary sump pump. They typically operate when the pump can’t keep up, is dead, or there is a power failure, almost always during severe rainstorms. The PowerGuard’s high-output DC pump has more pumping power than a 1/3HP sump pump and is designed for continuous operation in extreme weather.

LONGER RUNTIME

The PowerGuard’s DC pump draws less power from the battery to achieve the longest run time possible, over 300% longer than inverter-based systems.. 

By design, the pump uses the water being pumped out of the basin to cool its motor for a long service life and runtime. 

 
power guard battery backup system

Pumping Capacity

HEADGPM
5′3,670
10′2,480
15′1,630

Battery Runtime

CYCLE OPERATION
Continuous 5.5 hrs
2 Minutes 70 hrs
5 Minutes 168 hrs

Accessories

WI-FI MODULE

DUAL BATTERY KIT

Product information

Brochure

Owners Manual